DIY maintenance

DIY! Pick n' Place Maintenance

MGS Aftermarket Services Manager, Russ, walks you through key points to check should you have problems with your IPP machine.

Video 1 of 3 - Vacuum Cups

If you are not getting a clean pick or clean drop with your IPP machine, the first thing to check is the vacuum cups. This simple part is vital to clean picking mechanics. 

If a vacuum cup edge is frayed or torn, it will cause a small vacuum leak. This eventually leads to product placement failure. 

Video 2 of 3 - Vacuum Filters and Lines

If you are not getting a clean pick or clean drop with your IPP machine, the next thing to check is your vacuum filter and vacuum lines. A dirty filter causes inconsistencies in vacuum suction - this inexpensive part should be replaced regularly. 

Ensure all vacuum lines are free of debris, kinks and pinch points.

Video 3 of 3 - Coming soon!

If you'd like to talk to one of our experienced service technicians, reach out to us at info@mgsmachine.com or fill out the form below.

summer parts special

 

MGS Technologies for Kit Packaging Kwik Klips - Fast, Repeatable Changeovers for Pick n' Place Technologies